Pinnacle Studio 16 & 17 Ultimate – Picture in Picture / PIP Tutorial

Pinnacle Studio 16 & 17 Ultimate – Picture in Picture / PIP Tutorial


[BOOM!] [MUSIC] [MUSIC] [MUSIC] Hey guys, how ya’ll doing out there? It’s time for another tutorial from PinnacleStudioPro. All right people ya’ll been asking for this so I’m giving it to you. The picture in picture tutorial in Pinnacle Studio 16 & 17 Ultimate Let’s get into it. 1st thing you need to know is picture in picture is basically where you got one clip showing and then you got another clip showing on top of it Now, with this you can use as many picture in picture clips as you want you can put 4 in a video, you can put 5, you can put 10, put as many as you want you just gotta size everything up to the correct size. I might as well go ahead and get started with this. 1st thing I want to do is pull my first video clip down into the timeline track and I want to pull it down…I’m gonna pull it into track two Next thing you want to do is you want to take the clip that you want to show above it and you want to pull it into a timeline track above the other video clip. Depending on how you want it to show, if I wanted the front end of this video to show then I would just line up the front and I would trim it down to this position and now I just have the front end of it and they are matching in size or duration now if I wanted the back end to show then I would have to basically go ahead and trim it back out and bring it back out to the original size and pull this up here to a position where it’s kind of close to the edge and then I can trim this to this section. If I find out that it doesn’t match I can hit “Jump Forward” to the next It’ll jump forward. If I hit all the way to the end and if I click it back the
other way if I have to click it twice then I know I’m not lined up. Since it was only one click to get back, watch this…just one click I know I arm lined up perfectly so I’m good to go and now you’ll see just the end of the clip where as before it was just the beginning of the clip. Next thing I need to do is make make it so that I can see both of these videos, cause right now all I can see is the track that’s on top and that’s why he put it on top to make sure that you can see it over the bottom one. So what I’m gonna do is I’m gonna right click on the clip that’s on top I’m gonna go to “Open Effects Editor” and I’m gonna to to “2D-3D” Once I click on 2D-3D I’m gonna go all the way over to the end until I see this little arrow and I’m gonna click this little arrow to make more effects show up and I want the one called “Studio PIP” I’m gonna click on “Studio PIP” Right now all I see is the clip that’s going to be in the picture in picture but I want to see everything because I want to know where exactly this little video is. So in order to do that I come down until I come here to the solo button I click on this little arrow next to “Solo” and I get some choices here I’m gonna click on “Show Media and Tracks Below” Now I can see both of them and I know what the heck I’m doing I know where the neck the video will be I’m not blind as a bat anymore I can see what’s going on Now we got some options here We got some presets here We got “No Preset” which makes it right back like it was We got “Default” which places it in the upper right corner Then we got all the other presets. We can go top left, we can go bottom left we can go bottom right we can go centered and we can go centered with border So I’m gonna go with the default That fits perfectly where she’s at right here Keep in mind if you don’t like any of these positions where these default are at you can just go to position you can move this bad boy wherever the heck you want to by using your sliders or clicking it until it becomes blue and typing in the parameters of where you want it to go I’m gonna go back to default Also size, we can make this as big as we want as wide as we want all we gotta do is use our imagination and our sliders here and change these positions Another thing we could do is we can crop this bad boy If there was something in there we didn’t like want to chop his head off… See ya, head’s gone! Just use your sliders like I said crop out each on of these positions whatever you want, you can make curved corners if you want to make it look really nasty, filthy mcnasty with them filthy mcnasty curved corners!!! lf you like curved corners, there you go, curved corners for you Then you got your videos settings you can make your video transparent so you can see the background through it if you want to And then you got your borders So you can change the border width and the height, I’m gonna use 10 on mine and if there was uh…if i didn’t use curved corners then it would be just you know, regular corners, really sharp Right now I got curved corners so the
border’s around it as well You can change the softness of the border and of course you can make the border transparent if you want to and you can double click on this and you change the color of the border if you wish or you click on the eyedropper tool and you can make it the color of her collar the colors of this chair back here I’m not gonna do the chair And then you got shadow So if you want to see a shadow of… feels like a shadow that she’s casting you’ll probably want a shadow for this too it’ll make it look more realistic So if you… change your parameters on here that the shadow was coming you know casting this way then it’s good to put the shadow that way if the shadow was casted that the other way or you know change it to that or maybe to that You want to make your shadow match whatever the real shadow was casting on the video and of course you can make your shadow more transparent if you want to if it’s not a really dark shadow and you could change the softness of it as well make it look more realistic Alrighty then! I don’t like these shadows so I’m taking them out We’re good to go. Got all our settings or here we’ve got everything set up the way we want to, like I said before you can move it if you wanted to put more on here, let’s say you wanted to have like three or four you can do it pretty easily. Let’s take a look at it real quick click “OK” Save everything that I got done Let’s say I wanted to put another one on here, well a lot of people have been asking me “How do you get another track on it” “I only have 4 tracks”. Well you got to open up more tracks so as long as I’m doing this I might as well show you how to open up more tracks as well. I’m gonna right-click over here I’m gonna left click it first and then I’m gonna right click where it says “A/V Track”and now I’m gonna go to “Insert New Track” “Above” You can make the track above it below it wherever you want You can keep doing that as many times you want which means you can put as many videos in the PIP as you want to I can just keep right clicking here and doing insert track above right click insert track above I can just do that, it’s unlimited I can do as many tracks as I want to Now I don’t want all these tracks so I’m gonna delete them And I’m just gonna show you let’s just out one more PIP in here and I’ll bring this one down and this time I’ll have the beginning of the video so I’m gonna jump forward to the next position and iIm going to split this here then I’m going to click on this to activate it, and I’m gonna click my little “Trash Can” to get rid of this little edge, there ya go. Good to go. Right click on here again “Open Effects Editor” Go to 2D-3D again Hover over here until I get my arrow click on the arrow “Studio PIP” I’m gonna go down here to the solo button Click on “Show Media and Tracks Below” Guess what? Because this is on top of
everything You got this little border showing there well that because the other video is there underneath it I’m gonna move this down to “Bottom Right Corner” and, let’s see…as a matter of fact I’m gonna do something here I’m gonna make the “Vertical” negative 25 I’m gonna move that down a little bit so the only other thing I wanna do right now is I want to change the corner curve on here and then we’re going to do the border All right and we’re good to go I could actually move this one up a little bit which I probably will do Go ahead and click on okay to save this one I’ll go back down to this one, I’m gonna right click on it “Open Effects Editor” and for the position I’m just gonna change the vertical to 25 moves it up a little bit and now you can see Everything’s good to go and when I play this back you see the wonderful picture in picture going on That’s it. Picture in Picture tutorial just for you in Pinnacle Studio 16 and 17 ultimate. You guys know the routine All right I need you to do this with me real quick one time the button the thumb that button yes you see it at the bottom the one that’s pointed in the upward direction click it, like it, live it, love it, hug it Leave me your comments if you need help i’ll get back to you I’ll give you the help you need if I can’t help you I’ll point you in the right direction. And last but definitely not least don’t you ever forget to… SUBSCRIBE!!!!!!!! Thanks for watching we’ll see you again soon. [MUSIC] [MUSIC] [MUSIC]

100 thoughts on “Pinnacle Studio 16 & 17 Ultimate – Picture in Picture / PIP Tutorial

  • August 4, 2014 at 11:26 am
    Permalink

    Good Tutorial
    I have a question. Can we remove the background of a video in pinnacle studio 17without effecting the people in the front.

    Reply
  • August 10, 2014 at 7:08 pm
    Permalink

    Wow this was a very detailed an amazing video it showed me everything i needed to know for the PIP effect. Thanks so much i will definitely be using this in class. 

    Reply
  • August 18, 2014 at 4:26 am
    Permalink

    Hello!!! Thanks sooo much for your amazing tutorial videos. I have a question though, do you know how to make two different video clips play in the screen at the same time, but like this person did Ariel from the little mermaid appear in a video clip of Peter Pan using Pinnacle Studio 16??? Thanks a lot. This is how the video looks like Ariel & Peter Pan – Young and Beautiful

    Reply
  • August 21, 2014 at 8:47 pm
    Permalink

    How do you annotate your videos?

    Reply
  • August 23, 2014 at 9:37 am
    Permalink

    Can you choose one PIP for 5 seconds and make it go in the opposite PIP for the rest?

    Reply
  • September 2, 2014 at 2:58 pm
    Permalink

    Is there a way to save an effect preset so I can apply it in one click to anything that I want instead of manually changing the settings every time?

    Reply
  • September 8, 2014 at 4:44 pm
    Permalink

    cheers mate

    Reply
  • October 11, 2014 at 6:30 pm
    Permalink

    Hey friend I like your tutorials can u explain me how to make a full screen video because when I put it on you tube the screen is smaller please help me

    Reply
  • October 11, 2014 at 10:26 pm
    Permalink

    Tank u sooo muuchhh…you are the big masterrrrrrrrrrrrrrrrrrrrrrrrrrrrrr!!!!!!..tank uuuuuu…..
    ….tank (((((( uuuuuu,:):))))))))

    Reply
  • October 18, 2014 at 2:13 pm
    Permalink

    Thanks for another great video!

    Reply
  • October 21, 2014 at 12:31 am
    Permalink

    My screen is black everywhere but the video! Nothing happens. It doesn't work when I choose media and tracks below either!

    Reply
  • October 23, 2014 at 2:26 pm
    Permalink

    Can I put webcam in my game video?

    Reply
  • November 27, 2014 at 9:46 pm
    Permalink

    Do you how to make a dynamic logo for videos? Say moving flag in the entire video

    Reply
  • December 18, 2014 at 7:22 pm
    Permalink

    @PinnacleStudioPro I was wondering How do you increase a images MB size on pinnacle studio 17?  I'm trying to upload pictures to Alamy and they require a uncompressed minimum of 17mb. 
    Can you please help?

    Reply
  • December 30, 2014 at 3:33 pm
    Permalink

    Your videos are so helpful. There is no way I could navigate Pinnacle without your help. Once you see a tutorial then Pinnacle is a very good tool. Who has time to fiddle with unknown buttons. Your videos save me time in learning.Plus you keep it interesting with you antics. Thanks

    Reply
  • January 14, 2015 at 2:04 pm
    Permalink

    my background wont show up and I cant figure out why plz help

    Reply
  • January 14, 2015 at 10:42 pm
    Permalink

    Dude your always a huge help thanks a lot

    Reply
  • January 31, 2015 at 3:40 pm
    Permalink

    Thank you so much! This was a lot of help and you made it easy to understand. ^^

    Reply
  • February 7, 2015 at 9:15 pm
    Permalink

    You are the best!  Your making my video making process simple and easy.  Thanks!

    Reply
  • February 8, 2015 at 5:25 pm
    Permalink

    Hey Maliek (I figured we're on a first name basis by now!).  Can you roll the PIP's onto the screen like we do the titles and comments?  I see that PIP and that kind of transition in are both in the Emphasis section, and I can't figure out another way.

    Reply
  • February 28, 2015 at 7:41 am
    Permalink

    muchisimas gracias por tu ayuda !! 

    Reply
  • March 3, 2015 at 2:03 am
    Permalink

    Wow you are great you are helping me out a whole lot

    Reply
  • March 23, 2015 at 5:34 pm
    Permalink

    okay so I love this editor but I was wondering if you could make an end slate in this program ? 

    Reply
  • March 28, 2015 at 8:11 pm
    Permalink

    I am using PIP in Pinnacle 16 to run 4 video clips in the background and I want to change them to black and white to make the front video and text pop a little more.  Problem:  Using Effects Editor – Color – StudioBW and changing the setting amount to 100.  The video turns B&W while in FX Editor but once I return to my timeline and the clip renders, the clip returns to its normal color.  What's the issue?  Thanks

    Reply
  • April 4, 2015 at 1:30 am
    Permalink

    Very Helpful. Thank you!

    Reply
  • April 15, 2015 at 8:44 pm
    Permalink

    I saw most of your videos..really good.
    i´d like to learn how to hide logos in movements

    Reply
  • April 23, 2015 at 7:59 pm
    Permalink

    thanks for sharing that!

    Reply
  • April 27, 2015 at 9:42 pm
    Permalink

    Learned a lot in a short time. Thank you

    Reply
  • May 27, 2015 at 12:15 pm
    Permalink

    Thank you for the info.

    Reply
  • May 28, 2015 at 10:40 pm
    Permalink

    I have Pinnacle Studio 16 and it seems to be missing some features.  When doing PiP the only buttons at the bottom right are the star looking button and the full screen button.  The option to see the background video is not is not available.  Is there anything I can do about this? Thanks.

    Reply
  • June 11, 2015 at 10:43 pm
    Permalink

    Is this the same process if I have Studio 18 Ultimate?

    Reply
  • June 28, 2015 at 3:01 pm
    Permalink

    This was really helpful!  For my video I was doing green screen effects with two different subjects and needed a way to position and scale them. PIP worked perfectly and this video was just what I needed to get me going in the right direction.  Thank you!

    Reply
  • June 29, 2015 at 12:59 am
    Permalink

    REALLY HELPFUL

    Reply
  • June 30, 2015 at 12:48 am
    Permalink

    Hi @PinnacleStudioPro ! I'm using Studio Ultimate 18. When I try to use the PiP the video behind the edited clip is just black. The Video behind it will not show up. How can I fix this?

    Reply
  • July 15, 2015 at 6:31 pm
    Permalink

    Very helpful, thanks!

    Reply
  • July 24, 2015 at 12:38 am
    Permalink

    excellent helpful and saved me a two day head ache. thanks.

    Reply
  • August 16, 2015 at 6:31 am
    Permalink

    Great job sir! Helped out a bunch and your stuff is amazing. Keep'em coming and I appreciate the time you put into the work.

    Reply
  • August 17, 2015 at 10:00 pm
    Permalink

    so it wasnt showing the solo button at the bottom, i am using Pinnacle Studio 16 but its not there. where else do i find it?

    Reply
  • August 21, 2015 at 1:02 pm
    Permalink

    Is this the same process if you only have the plus version (17 or 18)?

    Reply
  • August 30, 2015 at 8:53 am
    Permalink

    Thank you so helpful 🙂

    Reply
  • August 30, 2015 at 12:43 pm
    Permalink

    I feel like you should be able to apply the same PIP effects to all items in a track- I'm making a video that is a 45 minute screencast, and I'm putting pictures in the video for the entire duration, back to back. Do I really have to do this process for each and every picture? I could save probably an hour if I could just insert the pictures, and then do this once… Am I missing something? I'm using Pinnacle Studio 18 Ultimate.

    Reply
  • September 12, 2015 at 9:09 pm
    Permalink

    Is this only with ULTIMATE you can do this?

    Reply
  • September 21, 2015 at 2:55 am
    Permalink

    Thanks for your videos, they are very helpful. I saw that in many of your videos you are using the red arrow to point to certain points of discussion. In previous inquiries about the source of this red arrow you indicated that you are using Camtasia to generate this red arrow. I was looking for a long time to find addons or plugins for Pinnacle that will enable me to insert such an arrow (or other similar sketch motion callouts) while editing a video (the same as you do using Camtasia) but could find nothing. I found many such addons for Final Cut Pro X but nothing for Pinnacle. Can you help? I am using Pinnacle 17 Ultimate.
    Thanks a bunch,
    Ari

    Reply
  • September 27, 2015 at 10:39 pm
    Permalink

    Great channel. One question. Are you using Pinnacle Studio when you draw the red arrows to highlight something?

    Reply
  • October 3, 2015 at 1:11 am
    Permalink

    start at 0:29

    Reply
  • October 19, 2015 at 8:52 pm
    Permalink

    Need more tutorial's for Pinnacle Studio 19 Ultimate. Thanks in advance.

    Reply
  • October 28, 2015 at 11:00 pm
    Permalink

    I've been using and thoroughly enjoying all your tutorials; they're informative and entertaining at the same time. Kudos and many thanks!

    Reply
  • November 24, 2015 at 7:48 pm
    Permalink

    Just one word: Great!

    Reply
  • December 4, 2015 at 9:59 pm
    Permalink

    Thank you SO much 🙂

    Reply
  • December 11, 2015 at 8:36 am
    Permalink

    Bless you!!

    Reply
  • December 12, 2015 at 5:38 am
    Permalink

    I think I will just spend all day watching your videos. You make it look so easy. Thanks for sharing.

    Reply
  • December 13, 2015 at 3:35 pm
    Permalink

    thx
    man

    Reply
  • December 26, 2015 at 6:36 am
    Permalink

    Can this work for Pinnacle Studio 18? When I do it, I don't see a solo button on the bottom.

    Reply
  • December 28, 2015 at 12:35 pm
    Permalink

    Thanks for the tutorial, worked perfectly. Is there a way to zoom into the PIP? e.g. as a transition you could end with the zoom into the PIP being full screen for the next scene? I am using v19 ultimate. Thanks.

    Reply
  • December 29, 2015 at 7:12 am
    Permalink

    This video saved my life

    Reply
  • January 28, 2016 at 5:34 am
    Permalink

    i put together photos and want to make a disc and can't because they say i have to reconnect to some photos deleted…..what do i do?

    Reply
  • March 13, 2016 at 9:42 pm
    Permalink

    un programma vergognoso, si inchioda di continuo, ma chi l'ha fatto un drogato?

    Reply
  • March 15, 2016 at 6:11 pm
    Permalink

    This was so helpful Thank you Very Much Great quality tutorial

    Reply
  • March 18, 2016 at 10:57 pm
    Permalink

    man…you can't explain worth shit

    Reply
  • March 26, 2016 at 11:07 am
    Permalink

    i wanna this into pannicle studio 15

    Reply
  • March 30, 2016 at 2:17 pm
    Permalink

    Thanks allot man I was trying to figure out how to make characters smaller inside a greenscreen and that sorts the problem out cheers

    Reply
  • April 7, 2016 at 10:10 am
    Permalink

    I have Pinnacle 14 and it has the option "copy all effects/past all effects", Pinnacle 19 has not it ?? Obviously, it is better Pinnacle 19! 😉

    Reply
  • April 8, 2016 at 11:29 pm
    Permalink

    Nice tutorial. Studio PIP is one of 5 picture in picture effects in Pinnacle Studio Ultimate 16. All can do a basis PIP but they have different advanced options. I like to use the 2D editor Advanced, because I don't have to adjust the height and width separately as with Studio PIP. It also allows rotation. I have a detailed comparison of the effects here: http://www.sheldonbrown.com/avid-pip.html — with a table listing their options.

    Reply
  • April 12, 2016 at 10:26 am
    Permalink

    Pinnacle Studio 16 ultimate don't show Library plz help me

    Reply
  • April 20, 2016 at 3:02 am
    Permalink

    Can you Make Still Pictures in with Pinnacle using the Green Screen?

    Reply
  • May 15, 2016 at 6:14 pm
    Permalink

    Pinnacle Studio Pro needs a little help from us. He did
    not pay me or encourage me to say this but Come on and Pledge with me a
    little bit of money to Patreon.com/MaliekWhitaker He has been so good
    to us and it has always been free. If everyone made just a $1 pledge It
    would Help Him out so much! I pledge $5 a month. Cancel at anytime.
    Go to: https://www.youtube.com/watch?v=zIbtQ1CBDBI and check it out.
    Please.

    Reply
  • May 19, 2016 at 7:15 pm
    Permalink

    You rock, man! You are by far the best instructor on this… wish there were more tutorials for 16. Thanks!!

    Reply
  • May 30, 2016 at 5:18 pm
    Permalink

    really wanna spend all day watching your videos. thanks.

    Reply
  • June 14, 2016 at 6:35 pm
    Permalink

    is there a way to put the pip video up mirrored?

    Reply
  • June 23, 2016 at 11:54 pm
    Permalink

    it seems to downgrade the quality if the picture Im ading to the main shot. Is there a way I can solve that? It wasn't doing that on the iOS app.

    Reply
  • June 25, 2016 at 6:10 pm
    Permalink

    I ALWAYS use your videos to help, thank you

    Reply
  • June 27, 2016 at 3:31 am
    Permalink

    awesome video!!! quick question though if you can help please, I did everything there but the audio on one of the main videos doesn't sound at all is there a way to fix that.. to make both video have sound?

    Reply
  • June 29, 2016 at 4:35 pm
    Permalink

    Thanks for the help. I appreciate it 😀 One question though. My videos have started to lag in many ways like, one video would play but the other wouldnt stream correctly. any tips?

    Reply
  • July 2, 2016 at 5:50 pm
    Permalink

    Nice videos!
    One question though. How do you get the "solo" button you are using to work on the layers? I have the pip effect and options, but I dont have the "solo" button.

    Reply
  • July 3, 2016 at 8:53 pm
    Permalink

    I need date and time on my video

    Reply
  • July 8, 2016 at 6:33 pm
    Permalink

    so I bought the Pinnacle studio 19, wanting to get into editing my own gamer videos, well going into effect editor, I have no effects ?!? please help

    Reply
  • July 12, 2016 at 12:09 am
    Permalink

    For some reason, I can't get it to do two effects in the same transition. I want the PIP to go from transparent to visible, and then expand from the small box to full screen. I get the fade in perfect, then when I add the fullscreen keyframe it does not start out small, but fades in over the whole screen. Any thoughts? Thanks

    Reply
  • July 17, 2016 at 2:15 pm
    Permalink

    Can I use PIP and have a title moving upward at the same time?

    Reply
  • August 7, 2016 at 6:22 pm
    Permalink

    Hi I am a beginner I'm trying to find a tutorial by you on how to cut sections out of my clip

    Reply
  • August 10, 2016 at 6:14 pm
    Permalink

    Hi again Maliek thank you so much for information i finally found my up loading file score fitter 3 ans its work. My last question is how to find 3D plugin for Pinacle 19 i already have the 3 d on my cyber link power director but not on my pinacle 19 yhank you in advance Robert….

    Reply
  • August 16, 2016 at 1:46 am
    Permalink

    I'm just messing around right now. I make videos and look forward to using Pinnacle Studio make my videos better.

    Reply
  • September 8, 2016 at 1:00 am
    Permalink

    my pip image covers the whole image what should i do

    Reply
  • October 22, 2016 at 2:34 pm
    Permalink

    is this what the tubers is using for movie and reaction??   they play the video and then they edit and add the movie trailer.???

    Reply
  • October 31, 2016 at 5:40 pm
    Permalink

    Thanks from Holland

    Reply
  • December 10, 2016 at 7:56 pm
    Permalink

    Firstly thanks for your informative and helpful video's…. I have been pressing the 'thumbs up' ! I am considering buying new video processing software and I would like to stay with pinnacle if the new version can do what I want (I have studio 11 that I bought years ago). What I need to do now is picture in picture, but I want to angle the small inner picture. Basically I want to have a film of someone holding a photo frame, where the image in the frame appears to come alive and speak, but would need to be tilted to make it realistic. Is this possible?

    Reply
  • February 25, 2017 at 9:07 pm
    Permalink

    Are we only limited to 2 active simultaneous videos with in a video?
    Please answer immediately

    Reply
  • March 24, 2017 at 3:32 pm
    Permalink

    can you use this program to make a reaction video? I have a camera to record my reaction to a particular video thank you

    Reply
  • March 28, 2017 at 7:22 pm
    Permalink

    Whenever I get stuck, it's always your videos that are the most helpful. Thank-you

    Reply
  • May 11, 2017 at 12:01 pm
    Permalink

    You are my hero, again. Keep it up this great work, is very usefull for new creators 👍👍👍

    Reply
  • August 10, 2017 at 12:54 pm
    Permalink

    31 second intro far to long

    Reply
  • August 27, 2017 at 6:50 am
    Permalink

    How do you flip a video around? Some videos loaded upside down and I can flip it right side up! Any advice would be great…! Thanks

    Reply
  • September 7, 2017 at 4:38 am
    Permalink

    Your tutorials are fantastic, maybe you can help me with Corel video x10 ultimate, I am playing guitar and I would like to make a video PIP side by side or clone myself playing double, can you please help me on this or someone that you know?
    Thank you, Terry

    Reply
  • November 2, 2017 at 1:07 pm
    Permalink

    Hello Mr. how are you? please I would like to ask you some thing about video editing. How to do, when programe presentator while he talk, how to set him at corner of the screen very fast same time and other video is aperence.It not look PIP, same screen he moved very fast and show his programe while he describe it.not zooming. Planing very fast only him.witch video editor can do it?thank you

    Reply
  • November 3, 2017 at 3:20 pm
    Permalink

    thank you very much Mr, your replay and support.I still have doubt about ,How Television live reporters are doing this.they don't have to time editing with pinnacle.maybe they use special video mixer to do them?

    Reply
  • May 24, 2018 at 5:19 pm
    Permalink

    gracias amigo

    Reply
  • May 26, 2018 at 6:42 pm
    Permalink

    Thank you so much

    Reply
  • March 8, 2019 at 1:57 pm
    Permalink

    Great tutorial , how to control the steam or stop each pip while other work in the same time..
    Any clue and thanks again

    Reply
  • March 11, 2019 at 11:23 pm
    Permalink

    THANKYOU!!!!! <3<3<3

    Reply
  • July 10, 2019 at 4:44 pm
    Permalink

    https://youtu.be/Jy7AFgVITBI

    इस वचन को जरूर सुनें आपकी जिन्दगिया बदल जाऐगी , यदि आप असफल हैं अपनी जिन्दगी में , आप निराश हैं या कोई बोझ के निचे हैं, इस वचन को सुनते सुनते चन्गे हो जाओगे ||

    GOD BLEES YOU

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *