BIG 3D PRINTED TANK – THE WHEELS

BIG 3D PRINTED TANK – THE WHEELS


hi everyone the big tank is back and for
that I had to print a whole lot of new parts So now that we have an insane amount of
parts let’s do an insane amount of assembly but before we do that let’s
talk about this week’s video sponsor Wix Wix allows you to create a
website for almost any purpose personal or professional and offers hundreds of
templates unlimited pages and top grade hosting for free and you can
upgrade to one of their premium plans to get even more I used Wix to create a website where I answer the most asked questions about
this tank project using one of the beautifully designed templates mixing
text video and images effortlessly I have updated the website with a few more
answers for questions that appeared in the last video so go and check them out
so go to wix.com slash go slash Ivan to build your free website today
and get 50% of a yearly premium plan with the promo code Ivan15 and now
let’s get back to the build and spacers well let’s try to put the wheelsets
on the chassis and again another five to go I’ve encountered a few issues this this
shouldn’t be like that and I would probably be better off with a twelve
millimeter axle that goes from side to side but I don’t have axels that long
just this shy of what I have so I will have to get better axles and I found
lots of issues that I haven’t showed you holes that weren’t big enough rods that
were too short but you know me those things happen so don’t let those things
get you down so if those things happen to you you have to know that those
happen to me too – I haven’t assembled all the things that I showed you at the
beginning of the video I still have buckets so I will have to leave those
for the next episode so don’t forget to subscribe if you want to see this thing
rolling and thanks a lot two Wix for sponsoring this video don’t forget to go
to wix.com / go slash Ivan and get 15% off of a early premium plan with the
promo code Ivan15 and thanks a lot to all my patreon supporters thank you guys
this thing is huge! please consider supporting me on patreon
and now please go and MAKE SOMETHING!

100 thoughts on “BIG 3D PRINTED TANK – THE WHEELS

  • September 20, 2019 at 8:01 pm
    Permalink

    wow what an amazing proyect!!! :]

    Reply
  • September 20, 2019 at 8:01 pm
    Permalink

    1st

    Reply
  • September 20, 2019 at 8:01 pm
    Permalink

    skrr First

    Reply
  • September 20, 2019 at 8:03 pm
    Permalink

    Hi Ivan !

    Reply
  • September 20, 2019 at 8:04 pm
    Permalink

    Your Back!!

    Reply
  • September 20, 2019 at 8:05 pm
    Permalink

    I really hope that electricity bills are not that high where you live… running all this big printers 24/7

    Reply
  • September 20, 2019 at 8:05 pm
    Permalink

    Hay una herramienta para taladro eléctrico que permite hacer las terminaciones de los tornillos y las varillas que te ayudaría a ir más rápido 🙂

    Reply
  • September 20, 2019 at 8:06 pm
    Permalink

    Great vid!

    Reply
  • September 20, 2019 at 8:07 pm
    Permalink

    Great video ivan. You take go big or go home tho the next level.

    Reply
  • September 20, 2019 at 8:07 pm
    Permalink

    how many 3d printers do you have?

    Reply
  • September 20, 2019 at 8:08 pm
    Permalink

    How many kilo filament is already in this project?

    Reply
  • September 20, 2019 at 8:10 pm
    Permalink

    How about a fully 3d printed bicycle? Then you could use it daily and not just once like the tank

    Reply
  • September 20, 2019 at 8:11 pm
    Permalink

    man, your hacksaw cuts through threaded rods like butter:)

    Reply
  • September 20, 2019 at 8:11 pm
    Permalink

    Wow, Ivan If you go on scaling up your workshop and tank project like you did since I subscribed it will soon dwarf real tanks. Keep it up, Dude!

    Reply
  • September 20, 2019 at 8:12 pm
    Permalink

    I love The Big Tank!

    Reply
  • September 20, 2019 at 8:12 pm
    Permalink

    Master Milos tank project and yours are the best projects on youtube!!! i just hope u will put a big enough motor in it 😀

    Reply
  • September 20, 2019 at 8:13 pm
    Permalink

    Woohoo 🎉

    Reply
  • September 20, 2019 at 8:13 pm
    Permalink

    Brilliant project!
    How does the drilling hold the filament in the tank treads?

    Reply
  • September 20, 2019 at 8:15 pm
    Permalink

    I really don't understand why you print these massive projects on a 0.4mm nozzle at 0.2mm layer height… seems very inefficient and a huge waste of time. Get an E3D volcano or a Mosquito Magnum with a 0.8, 1 or 1.2mm nozzle and print at layers above 0.6mm, you won't regret it, will take your print time down by 8 times and even more and will make your prints even more solid.

    Reply
  • September 20, 2019 at 8:16 pm
    Permalink

    What software do you use?

    Reply
  • September 20, 2019 at 8:19 pm
    Permalink

    You're awesome Ivan 🙂 Keep it up!

    Reply
  • September 20, 2019 at 8:19 pm
    Permalink

    oh you madman

    Reply
  • September 20, 2019 at 8:19 pm
    Permalink

    Awesome video! I'm fascinated by this project and how much time you must spend on it. Can't wait to see this thing finished!

    Reply
  • September 20, 2019 at 8:20 pm
    Permalink

    How much printers do you have to print all of that

    Reply
  • September 20, 2019 at 8:22 pm
    Permalink

    I predict that if your tank gets any bigger or heavier, that you will soon need a hydraulic auto lift to pick it up!

    Reply
  • September 20, 2019 at 8:24 pm
    Permalink

    Ivan, are you just gradually working your way to a 1:1 model of a tank? I hope so.

    Reply
  • September 20, 2019 at 8:24 pm
    Permalink

    Did you move up to 3mm filament to connect the tank treads. This thing is crazy! I can’t imagine doing a 6 day print. I don’t like to do anything over 12 hours.

    Reply
  • September 20, 2019 at 8:27 pm
    Permalink

    will you have the power to even move this. Its looking heavier and heavier every time we see it. What printer are you using for this, and how many?

    cant wait to see the finished thing. Are you planning on this being amphibious 🙂

    Reply
  • September 20, 2019 at 8:29 pm
    Permalink

    Omg….👌🏻👌🏻👌🏻

    Reply
  • September 20, 2019 at 8:31 pm
    Permalink

    Will you use the same motor as before or something beefier?

    Reply
  • September 20, 2019 at 8:32 pm
    Permalink

    i love your videos, but i hate your english!!

    Reply
  • September 20, 2019 at 8:34 pm
    Permalink

    you, sir, are *mad*! I like it.

    Reply
  • September 20, 2019 at 8:43 pm
    Permalink

    We will use that in the raid right

    Reply
  • September 20, 2019 at 8:45 pm
    Permalink

    My family is definitely wondering why I'm excitedly yelling "spacers" at my phone in a bad Spanish accent.

    Reply
  • September 20, 2019 at 8:46 pm
    Permalink

    I feel like some of those fastening choices were made after binge building IKEA furniture. Great stuff, can't wait for updates on this project!

    Reply
  • September 20, 2019 at 8:46 pm
    Permalink

    Ivan I think your might need to make a crane if you want to get it on the floor.

    Reply
  • September 20, 2019 at 8:46 pm
    Permalink

    Great Projekt 👍
    What kind of printer did you use?

    Reply
  • September 20, 2019 at 8:47 pm
    Permalink

    Awesome 👏

    Reply
  • September 20, 2019 at 8:47 pm
    Permalink

    Don't forget to fix the broken dowel on your table leg!

    Reply
  • September 20, 2019 at 8:51 pm
    Permalink

    I can't wait to see you up on it ^^

    Reply
  • September 20, 2019 at 8:51 pm
    Permalink

    don't forget that not all of your support struts are installed. you really should go back and put them all in.

    Reply
  • September 20, 2019 at 8:51 pm
    Permalink

    I'm so glad to see this project coming along. Have you considered getting an unpaid intern?
    Great video. Keep up the good work.

    Reply
  • September 20, 2019 at 8:53 pm
    Permalink

    Estas un poco loco Ivan, increible!

    Reply
  • September 20, 2019 at 8:54 pm
    Permalink

    i dont wanna hate or anything… but you printing every single thing without using other materials seems like a huge waste of plastic and time… just saying.

    Reply
  • September 20, 2019 at 8:57 pm
    Permalink

    I don't get it. How where those pivot axles intended to fit? Where they supposed to lay flat nested in recesses? If someone could give me a brief explanation of the design that would be awesome. Usually I understand where he's heading but I just don't get this. Why so long? I'm totally flummoxed. Thanks in advance.

    Reply
  • September 20, 2019 at 8:57 pm
    Permalink

    Fantastic work, Ivan! It's looking better and better! 😂

    Reply
  • September 20, 2019 at 9:01 pm
    Permalink

    Joel had to get an assistant…… I think it's time Ivan

    Reply
  • September 20, 2019 at 9:01 pm
    Permalink

    you still have not fixed your table. There is still a broken wooden peg holding the tabletop up.

    Reply
  • September 20, 2019 at 9:07 pm
    Permalink

    You can save some time when smoothing the rough edges of the freshly cut shafts by putting them in your drill's chuck (assuming it can fit them) and spinning them on a file or sand paper. Thins also ensures the edge fillets are more or less uniform.

    Reply
  • September 20, 2019 at 9:07 pm
    Permalink

    Can you make a 3d printed human size boat??😂😂😂😂

    Reply
  • September 20, 2019 at 9:07 pm
    Permalink

    Do yourself a favor and use real springs in the suspension.

    Reply
  • September 20, 2019 at 9:08 pm
    Permalink

    Where can I find all stl files?

    Reply
  • September 20, 2019 at 9:08 pm
    Permalink

    ❤️❤️❤️TANK!!!!

    Reply
  • September 20, 2019 at 9:11 pm
    Permalink

    Is there a point at which it is too big lol

    Reply
  • September 20, 2019 at 9:14 pm
    Permalink

    we want more! we wont more! i waited for more than 2 weeks for this episode! i think this build is the biggest build with moving 3D parts! it should be a record!

    Reply
  • September 20, 2019 at 9:15 pm
    Permalink

    why not use a larger nozzle? .8 and the print time is cut in half

    Reply
  • September 20, 2019 at 9:17 pm
    Permalink

    I love the video! And actually I do like Wix too. It's better than square space, and works!

    Reply
  • September 20, 2019 at 9:19 pm
    Permalink

    This is amazing!!!!!!
    And your editing video skills are getting beatiful!

    Reply
  • September 20, 2019 at 9:23 pm
    Permalink

    So I assume once this is done you'll be declaring war on/immediately be declared ruler of France?

    Reply
  • September 20, 2019 at 9:26 pm
    Permalink

    Epic project! Great film and editing. Mahalo for sharing. : )

    Reply
  • September 20, 2019 at 9:36 pm
    Permalink

    you ever going to finish the tank?

    Reply
  • September 20, 2019 at 9:36 pm
    Permalink

    I can't help it. When i see this big box you call a tank i also see a boat. Only need some water tight seal and a couple of printed water jets.

    Reply
  • September 20, 2019 at 9:43 pm
    Permalink

    Nice Video. It's a bit like Art Attack. xD

    Reply
  • September 20, 2019 at 9:51 pm
    Permalink

    Ivan, I recommend that you get yourself a .6 or preferably a .8 nozzle for your CR-10. Your prints will be much stronger at .8 with .4 layer height. They will still look good and they will take far less time to print. Just be sure to do a test print or two to adjust your perimeters and infill as they will both change. You do run the printer a little slower, temp a little hotter but you still finish way faster. 😉

    Reply
  • September 20, 2019 at 9:59 pm
    Permalink

    Awesome, though… hoping that is recyclable plastic. 😉

    Reply
  • September 20, 2019 at 10:10 pm
    Permalink

    knowing ivan its going to fail xD

    Reply
  • September 20, 2019 at 10:25 pm
    Permalink

    In our old age, some of us will drive golf carts, but Ivan will be riding this tank.

    Reply
  • September 20, 2019 at 10:26 pm
    Permalink

    Why not go for a bigger nozzle?

    Reply
  • September 20, 2019 at 10:28 pm
    Permalink

    Sad I couldn't watch sooner I was at school.

    Reply
  • September 20, 2019 at 10:55 pm
    Permalink

    Why always red?

    Reply
  • September 20, 2019 at 11:00 pm
    Permalink

    *eats a part you need*

    Reply
  • September 20, 2019 at 11:11 pm
    Permalink

    How about couplers on the threaded bar?

    Reply
  • September 20, 2019 at 11:34 pm
    Permalink

    Me parecia que hablabas el ingles raro.. cuando ví tu nombre lo entendí XD

    Reply
  • September 20, 2019 at 11:43 pm
    Permalink

    Oof.. that's a LOT of pressure on those bearings. If you haven't already, please double check their recommended use and load limits. You may need to switch to a different style bearing at this size.

    Reply
  • September 21, 2019 at 12:01 am
    Permalink

    I too have a rod that is too short, I'm sorry to hear that Friend.

    Reply
  • September 21, 2019 at 12:11 am
    Permalink

    I think you should invest in unthreaded rods, a thread and tap kit and start working Turnbuckles into your designs. you seem to be getting just up to the cusp of needing industrial rods cut to length so turnbuckles will let you keep using hardware store rods without getting absurd lengths and ending up with a lot of scrap.

    Reply
  • September 21, 2019 at 12:23 am
    Permalink

    How are you so patient

    Reply
  • September 21, 2019 at 12:45 am
    Permalink

    I am in awe of every single one of these videos. I'd be pretty thrilled with myself if I got any single part of this project printed and assembled, let alone the whole tank.

    Reply
  • September 21, 2019 at 12:55 am
    Permalink

    the piece(s) you called an idler wheel is in fact the road wheel. there is generally one drive wheel and one idler wheel per side, any number of road wheels, and a few return rollers/skids

    Reply
  • September 21, 2019 at 1:05 am
    Permalink

    What tank is this modeled after?

    Reply
  • September 21, 2019 at 1:14 am
    Permalink

    Keep up dude. Such an inspiring project for me especially. Thanks for the spirit. Indeed that.

    Reply
  • September 21, 2019 at 1:37 am
    Permalink

    another great video and another great progress on the tank! awesome 😀

    Reply
  • September 21, 2019 at 2:02 am
    Permalink

    The wheels alone are 14.88 Kg… And took 72 days to print? Jeez man

    Reply
  • September 21, 2019 at 2:07 am
    Permalink

    you, sir, need a crane pulley thing installed in your roof on some sliders so you can lift things… certainly not like engine block things (too much support required) but this tank would be effortless.

    Reply
  • September 21, 2019 at 2:11 am
    Permalink

    spacer, this video hasn't spacers. i can't believe that.

    Reply
  • September 21, 2019 at 2:24 am
    Permalink

    You have to calibrate every printer so time consuming.

    Reply
  • September 21, 2019 at 2:58 am
    Permalink

    Take a look at the first tank! he is going mad!!!!! very nice!!

    Reply
  • September 21, 2019 at 3:23 am
    Permalink

    This is the next level op 3d printing, omg this cost alot of printing time!!!!! Love to see progress

    Reply
  • September 21, 2019 at 3:32 am
    Permalink

    Love your vids brohizzle! Why-o-WHY do you print such big things with such a small nozzle…. and layer height? That seems loco…

    Reply
  • September 21, 2019 at 4:07 am
    Permalink

    Your video editing & producing skills have really gotten quite awesome. Keen to see the end result of this beast mode monstrosity

    Reply
  • September 21, 2019 at 5:13 am
    Permalink

    Awesome work. How many printers do you actually have right now?

    Reply
  • September 21, 2019 at 5:20 am
    Permalink

    glue Ivan glue

    Reply
  • September 21, 2019 at 5:48 am
    Permalink

    you are crazy as a mad horse

    Reply
  • September 21, 2019 at 6:14 am
    Permalink

    Love your work!
    this is way better than tv😇

    Reply
  • September 21, 2019 at 6:34 am
    Permalink

    Crazy-Ivan. That's ridiculous scale for 3D printing. I'm saying all this with huge love. ❤️
    Will be amazing thing to see once finished.

    Reply
  • September 21, 2019 at 7:30 am
    Permalink

    coollll….
    love from indonesia…

    Reply
  • September 21, 2019 at 8:06 am
    Permalink

    r u sure they line up? if not then track may fell off of it i hope you notice it sooner or later
    have great day n enjoying watching ya do something new

    Reply
  • September 21, 2019 at 8:38 am
    Permalink

    gonna need a bigger table, maybe print one hehe

    Reply
  • September 21, 2019 at 8:47 am
    Permalink

    WASTE

    Reply
  • September 21, 2019 at 10:16 am
    Permalink

    Nice work but how much does all this plastic cost?

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *